View All Of Our Products
Tenryu IA-305100DN
INDUSTRIAL SERIES for NON-FERROUS
TENRYU has once again raised the standards in non-ferrous cutting.
Introducing the new IA Series
Up to 20" Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
IA-305100DN
12"
100
1"
TCG
.110"
-5
Thin stock
…
Tenryu IA-30580DN
INDUSTRIAL SERIES for NON-FERROUS
TENRYU has once again raised the standards in non-ferrous cutting.
Introducing the new IA Series
Up to 20" Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
IA-30580DN
12"
80
1"
TCG
.094"
-5
General purpose
…
Tenryu IA-355100DN
INDUSTRIAL SERIES for NON-FERROUS
TENRYU has once again raised the standards in non-ferrous cutting.
Introducing the new IA Series
Up to 20" Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
IA-355100DN
14"
100
1"
TCG
.118"
-5
General purpose
…
Tenryu IA-405120DN
INDUSTRIAL SERIES for NON-FERROUS
TENRYU has once again raised the standards in non-ferrous cutting.
Introducing the new IA Series
Up to 20" Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
IA-405120DN
16"
120
1"
TCG
.134"
-5
General purpose
…
Tenryu IA-455120DN
INDUSTRIAL SERIES for NON-FERROUS
TENRYU has once again raised the standards in non-ferrous cutting.
Introducing the new IA Series
Up to 20" Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
IA-455120DN
18"
120
1"
TCG
.142"
-5
General purpose
…
Tenryu IA-510120DN
INDUSTRIAL SERIES for NON-FERROUS
TENRYU has once again raised the standards in non-ferrous cutting.
Introducing the new IA Series
Up to 20" Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
IA-510120DN
20"
120
1"
TCG
.150"
-5
General purpose
…
Tenryu PR-255100AB
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-255100AB
10"
100
5/8"
ATAFR
.118"
15
For use in veneers and thin stock. Unparalleled performance. See also Mel-Pro for cutting veneer-faced plywood.
…
Tenryu PR-25560CBN
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-25560CBN
10"
60
5/8"
ATB
.110"
20
Pro Series for wood. A fast and clean cutting blade for table saws.
…
Tenryu PR-25560D
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-25560D
10"
60
5/8"
TCG
.110"
10
Triple chip grind for durability. Great woodworking blade. See quote above
…
Tenryu PR-25580CBN
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-25580CBN
10"
80
5/8"
ATB
.118"
20
Our popular 80 tooth woodworking Pro Series blade. Better for thinner materials.
…
Tenryu PR-25580D
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-25580D
10"
80
5/8"
TCG
.118"
10
With triple chip grind for endurance. Excellent woodworking blade.
…
Tenryu PR-305100AB
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-305100AB
12"
100
1"
ATAFR
.118"
15
Great for cutting veneer and thin stock on table saws.
…
Tenryu PR-30560CBN
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-30560CBN
12"
60
1"
ATB
.118"
20
Great 12" table saw blade. Positive rake for thick stock.
…
Tenryu PR-30580CBN
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-30580CBN
12"
80
1"
ATB
.118"
20
Fine cut-off on table saws. Positive rake.
…
Tenryu PR-355100AB
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-355100AB
14"
100
1"
ATAFR
.118"
15
For cutting veneers and brittle stock when finest cuts are needed.
…
Tenryu PR-35580AB
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-35580AB
14"
80
1"
ATAFR
.118"
15
For fine woodworking with your 14" saw. Excellent value.
…
Tenryu PR-405100CBN
PRO SERIES for WOOD
TENRYU'S superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.
EACH BLADE FEATURES:
Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
High-grade, extra hard, wear-resistant carbide tips for long life.
Fine grit honing of carbide edges for clean, smooth cuts.
Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw fs plate vibration-free!
"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Fine Woodworking, Nov/Dec 1997 (page110)
Standard Tips Tenryu Tip
Compare Tenryu's Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PR-405100CBN
16"
100
1"
ATB
.126"
20
Super clean cuts in wood on 16" saws; Especially for thin stock.
…
Tenryu PRA-21660DN
PRO SERIES FOR NON-FERROUS METALS
TENRYU'S superior quality line for extra heavy duty applications.
Our "Cadillac/Mercedes" grade.
EACH BLADE FEATURES:
Heavier, laser cut, fully-hardened blade bodies stay flatter and truer longer.
Top-quality, fine-grain, premium grade carbide tips for smoother cuts and longer life.
Tips are fine-finish honed on all surfaces down to 600 grit.
PRA-21660DN
8-1/2"
60
5/8"
TCG
.110"
0
For industrial non-ferrous applications. Pro Series
…
Tenryu PRA-255100DN
PRO SERIES FOR NON-FERROUS METALS
TENRYU'S superior quality line for extra heavy duty applications.
Our "Cadillac/Mercedes" grade.
EACH BLADE FEATURES:
Heavier, laser cut, fully-hardened blade bodies stay flatter and truer longer.
Top-quality, fine-grain, premium grade carbide tips for smoother cuts and longer life.
Tips are fine-finish honed on all surfaces down to 600 grit.
PRA-255100DN
10"
100
5/8"
TCG
.102"
-5
Especially for thin-wall extrusions and use on slide-miter saws.
…
Tenryu PRA-25580DN
PRO SERIES FOR NON-FERROUS METALS
TENRYU'S superior quality line for extra heavy duty applications.
Our "Cadillac/Mercedes" grade.
EACH BLADE FEATURES:
Heavier, laser cut, fully-hardened blade bodies stay flatter and truer longer.
Top-quality, fine-grain, premium grade carbide tips for smoother cuts and longer life.
Tips are fine-finish honed on all surfaces down to 600 grit.
PRA-25580DN
10"
80
5/8"
TCG
.126"
0
Pro Series for aluminum. Industrial quality non-ferrous saw blade.
…
![Shop Fox W1812 - 7" 2HP Planer Moulder](images/thumbs/600_300/w1812-9cc0df9fe5b97e5605843146c06c136e.jpg "Shop Fox W1812 - 7" 2HP Planer Moulder")
- Onsrud 3/8" Solid Carbide Three Flute Compression w/Marathon Coating
- Onsrud Solid Carbide Router Bit 60-123MW, 2 Flute, Compression (3/8" DIA x 7/8" CEL)
- Onsrud Double Flute - Solid Carbide Downcut Spiral Wood Rout (1/4 Cut DIA, 7/8 Flute LGTH)
- Onsrud Double Flute - PCD Tipped Tooling - PCD Full Face (1/4 Cut DIA, 3/4 Flute LGTH)
- Single Flute - Solid Carbide Upcut Spiral O Flute (1/4 Cut DIA, 1-1/4 Flute LGTH, 1/4 SHK DIA)
- Onsrud Double Flute - Solid Carbide Max Life Compression Spiral (3/8 Cut DIA, 1-1/8 Flute LGTH)
- Onsrud Double Flute - Solid Carbide Chipbreaker Finisher UPCUT (1/2 Cut DIA, 1-5/8 Flute LGTH)
- Onsrud Double Flute - High Speed Steel O Flute Straight
- Single Flute - Solid Carbide Upcut Spiral O Flute HP METRIC (4mm Cut DIA, 20mm Flute LGTH, 6mm SHK DIA)
- Onsrud Double Flute - Solid Carbide Chipbreaker Spiral (1/2 Cut DIA, 1-5/8 Flute LGTH)