View All Of Our Products
Tenryu PRF-40580D*
STEEL-PRO® SERIES
TENRYU's steel cutting carbide tipped saw blades for industrial performance
Cut ferrous metals (mild steel) faster, cleaner and easier. Save time, money, the environment, and your respiratory health.
TENRYU's complete series of steel cutting saw blades called "Steel-Pro®" makes light work out of all kinds of mild steel: steel studs, steel sheet, steel pipe, channel, threaded rod and much, much more.
Specially formulated C-6 carbide grade, combined with our unique tip design, resists breakage on impact and lasts longer- much longer than standard carbides or abrasive discs. Special tooth geometry with "inserted" tooth design greatly improves security of the tip, efficiency and durability.
Abrasive discs throw sparks and lots of dust including unhealthful fiberglass. You shouldn't be breathing it in! Steel-Pro® blades reduce spark production and eliminate abrasive wheel dust.
Abrasive discs wear quickly, requiring frequent blade changes. Steel-Pro® blades allow you to keep working; eliminating down time for frequent blade changes. In addition, Steel-Pro® cuts 5 to 10 times faster than abrasives. Typically, one Steel-Pro® blade will outlast somewhere between 15 to 30 abrasive blades. Think of all that non-productive "down time".
Abrasive discs leave a sharp burr at the cutting edge that must be removed later. Steel-Pro® blades cut clean; eliminating this extremely time-consuming after-cut process. "Time is money". Steel-Pro® saves BOTH!
EACH BLADE FEATURES:
Rugged plates and specially formulated carbide tips with a special tooth grind for fast, clean cuts.
High quality cuts without the clouds of dust and scorch marks associated with friction blades.
Cool cuts that leave the work piece edge free of burrs.
Reduced cost-per-cut and maximized performance for the operator as a result of fewer blade changes.
Please note all safety instructions before use and adhere to instructions for maximum RPM speeds.
PRF-40580D*
16"
80
1"
TCG
.102"
0
For use on low RPM saws for cutting mild steel.
…
Tenryu PRS-18540
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-18540
7-1/4"
40
5/8"KO
TCG
.094"
-5
For clean, easy cuts using portable saws.
…
Tenryu PRS-20360
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-20360
8"
60
5/8"
TCG
.094"
-5
For 8" panel saws and portable saws.
…
Tenryu PRS-22064
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-22064
220mm
64
30mm*
TCG
.102"
-5
For use on 220mm panel saws.
…
Tenryu PRS-25560
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-25560
10"
60
5/8"
TCG
.102"
-5
Excellent low heat performance in solid surface. Allows faster feed rates. For table or miter saw use.
…
Tenryu PRS-25580
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-25580
10"
80
5/8"
TCG
.102"
-5
Exceptionally clean cuts in thinner stock using table or miter saws.
…
Tenryu PRS-30080
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-30080
300mm
80
30mm*
TCG
.110"
-5
For 300mm panel saws. No scoring saw needed
…
Tenryu PRS-305100
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-305100
12"
100
1"
TCG
.110"
-5
Super clean cuts in thinner materials. For miter or table saw applications.
…
Tenryu PRS-30580
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-30580
12"
80
1"
TCG
.110"
-5
Great results on 12" saws. Faster feed rates in thick material.
…
Tenryu PRS-355100
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-355100
14"
100
1"
TCG
.126"
-5
Excellent performance in a 14" blade.
…
Tenryu PRS-405120
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-405120
16"
120
1"
TCG
.134"
-5
Very clean cuts in solid surface materials.
…
Tenryu PRS-455120
PRO SERIES for SOLID SURFACE
Premium design and craftsmanship
The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.
*Solid surface is produced under trade names such as Corian®, Avonite®, Fountainhead® and others.
EACH BLADE FEATURES:
Laser cut, fully-hardened tool steel plates for industrial use.
Individually hand-tensioned plates for true, accurate cuts.
Built-in dampening system to minimize vibration and reduce noise.
Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.
PRS-455120
18"
120
1"
TCG
.134"
-5
Excellent heavy duty performance.
…
Tenryu PSA-16056D2
PLUNGE-CUT SAW BLADE SERIES
TENRYU proudly introduces a new choice of quality saw blades for plunge cut saws. These blades are suitable for:
The FESTOOL® TS55 & TS75 machines
and others
5 years R&D work and study for ultimate plunge-cut saw blades in various applications.
Resin filled laser cut slots to reduce cutting noise and to reduce vibration
PTFE coated plate to reduce pitch build-up and to lower resistance
Select grade of carbide tips for industrial quality jobs
ATAF shear face grind for splinter-free cross cuts
PSA-16056D2
160mm
56
20mm
TCG
.087"
-3
.063"
Aluminum
…
Tenryu PSA-21068D3
PLUNGE-CUT SAW BLADE SERIES
TENRYU proudly introduces a new choice of quality saw blades for plunge cut saws. These blades are suitable for:
The FESTOOL® TS55 & TS75 machines
and others
5 years R&D work and study for ultimate plunge-cut saw blades in various applications.
Resin filled laser cut slots to reduce cutting noise and to reduce vibration
PTFE coated plate to reduce pitch build-up and to lower resistance
Select grade of carbide tips for industrial quality jobs
ATAF shear face grind for splinter-free cross cuts
PSA-21068D3
210mm
68
30mm
TCG
.094"
-3
.063"
Aluminum cutting
…
Tenryu PSL-16048ABM2
PLUNGE-CUT SAW BLADE SERIES
TENRYU proudly introduces a new choice of quality saw blades for plunge cut saws. These blades are suitable for:
The FESTOOL® TS55 & TS75 machines
and others
5 years R&D work and study for ultimate plunge-cut saw blades in various applications.
Resin filled laser cut slots to reduce cutting noise and to reduce vibration
PTFE coated plate to reduce pitch build-up and to lower resistance
Select grade of carbide tips for industrial quality jobs
ATAF shear face grind for splinter-free cross cuts
PSL-16048ABM2
160mm
48
20mm
ATAFR
.087"
-5
.063"
Melamine
…
Tenryu PSL-16048D2
PLUNGE-CUT SAW BLADE SERIES
TENRYU proudly introduces a new choice of quality saw blades for plunge cut saws. These blades are suitable for:
The FESTOOL® TS55 & TS75 machines
and others
5 years R&D work and study for ultimate plunge-cut saw blades in various applications.
Resin filled laser cut slots to reduce cutting noise and to reduce vibration
PTFE coated plate to reduce pitch build-up and to lower resistance
Select grade of carbide tips for industrial quality jobs
ATAF shear face grind for splinter-free cross cuts
PSL-16048D2
160mm
48
20mm
TCG
.087"
5
.063"
Laminate Flooring
…
Tenryu PSL-21052D3
PLUNGE-CUT SAW BLADE SERIES
TENRYU proudly introduces a new choice of quality saw blades for plunge cut saws. These blades are suitable for:
The FESTOOL® TS55 & TS75 machines
and others
5 years R&D work and study for ultimate plunge-cut saw blades in various applications.
Resin filled laser cut slots to reduce cutting noise and to reduce vibration
PTFE coated plate to reduce pitch build-up and to lower resistance
Select grade of carbide tips for industrial quality jobs
ATAF shear face grind for splinter-free cross cuts
PSL-21052D3
210mm
52
30mm
TCG
.094"
5
.063"
Laminate, composite, or flooring materials cutting
…
Tenryu PSW-16012CBD2
PLUNGE-CUT SAW BLADE SERIES
TENRYU proudly introduces a new choice of quality saw blades for plunge cut saws. These blades are suitable for:
The FESTOOL® TS55 & TS75 machines
and others
5 years R&D work and study for ultimate plunge-cut saw blades in various applications.
Resin filled laser cut slots to reduce cutting noise and to reduce vibration
PTFE coated plate to reduce pitch build-up and to lower resistance
Select grade of carbide tips for industrial quality jobs
ATAF shear face grind for splinter-free cross cuts
PSW-16012CBD2
160mm
12
20mm
ATB
.087"
20
.063"
Wood (Rip cuts)
…
Tenryu PSW-16028CBD2
PLUNGE-CUT SAW BLADE SERIES
TENRYU proudly introduces a new choice of quality saw blades for plunge cut saws. These blades are suitable for:
The FESTOOL® TS55 & TS75 machines
and others
5 years R&D work and study for ultimate plunge-cut saw blades in various applications.
Resin filled laser cut slots to reduce cutting noise and to reduce vibration
PTFE coated plate to reduce pitch build-up and to lower resistance
Select grade of carbide tips for industrial quality jobs
ATAF shear face grind for splinter-free cross cuts
PSW-16028CBD2
160mm
28
20mm
ATB
.087"
15
.063"
Wood (Combination)
…
Tenryu PSW-16048AB2
PLUNGE-CUT SAW BLADE SERIES
TENRYU proudly introduces a new choice of quality saw blades for plunge cut saws. These blades are suitable for:
The FESTOOL® TS55 & TS75 machines
and others
5 years R&D work and study for ultimate plunge-cut saw blades in various applications.
Resin filled laser cut slots to reduce cutting noise and to reduce vibration
PTFE coated plate to reduce pitch build-up and to lower resistance
Select grade of carbide tips for industrial quality jobs
ATAF shear face grind for splinter-free cross cuts
PSW-16048AB2
160mm
48
20mm
ATAFR
.087"
10
.063"
Wood (Cross cuts)
…
![Shop Fox M1113 - 18" 1.5HP Variable Speed Wood and Metal Cutting Bandsaw](images/thumbs/600_300/m1113 Wood Metal Bandsaw.jpg "Shop Fox M1113 - 18" 1.5HP Variable Speed Wood and Metal Cutting Bandsaw")
- Onsrud 3/8" Solid Carbide Three Flute Compression w/Marathon Coating
- Onsrud Solid Carbide Router Bit 60-123MW, 2 Flute, Compression (3/8" DIA x 7/8" CEL)
- Onsrud Double Flute - Solid Carbide Downcut Spiral Wood Rout (1/4 Cut DIA, 7/8 Flute LGTH)
- Onsrud Double Flute - PCD Tipped Tooling - PCD Full Face (1/4 Cut DIA, 3/4 Flute LGTH)
- Single Flute - Solid Carbide Upcut Spiral O Flute (1/4 Cut DIA, 1-1/4 Flute LGTH, 1/4 SHK DIA)
- Onsrud Double Flute - Solid Carbide Max Life Compression Spiral (3/8 Cut DIA, 1-1/8 Flute LGTH)
- Onsrud Double Flute - Solid Carbide Chipbreaker Finisher UPCUT (1/2 Cut DIA, 1-5/8 Flute LGTH)
- Onsrud Double Flute - High Speed Steel O Flute Straight
- Single Flute - Solid Carbide Upcut Spiral O Flute HP METRIC (4mm Cut DIA, 20mm Flute LGTH, 6mm SHK DIA)
- Onsrud Double Flute - Solid Carbide Chipbreaker Spiral (1/2 Cut DIA, 1-5/8 Flute LGTH)