Powermatic 201 Planer, 7.5HP 1PH 230V

This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1 /16 with each turn of the hand wheel. The model 201 is available with a 7-1 /2 horsepower, 3-phase or single-phase motor. This planer is perfect for the small to medium shop with continuous planing requirements.
  • Cast iron 1300 lb. construction for solid performance without vibration
  • 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
  • Segmented infeed roller with sectional chipbreaker allows multiple board planing
  • 4-knife head offers 19,200 cuts per minute and widest capacity in its class
  • Roller bearing-mounted feed rollers for long life
  • Adjustable bed rollers allow smooth feeding of rough or finished workpieces
  • Oversized cast iron table travels on 2 large lead screws for heavy duty support
  • Standard Equipment:
  • Dust collection chute with 5" port
  • Adjustable foot pads
  • Knife setting gauge
  • Tool kit (6, 8, and 10mm wrenches, 12-14mm, and 22-24mm combination wrenches)
Part Number 1791261  
Maximum Planing 22 "
Maximum Planing Thickness 9¼ "
Maximum Depth of Cut 3/16 "
Minimum Planing Length 10 "
Cutterhead Diameter 3¼ "
Cutterhead Speed 4800 RPM
Cuts Per Minute 19200  
Feed Rate 20 and 30 FPM  
Outfeed Roller Diameter 3 "
Number of Knives 4  
Table Size 32 1/4" x 24"  
Dust Port Diameter 5 "
Dust Collection Minimum CFM Required 900 cu.ft/min
Bed Rollers Adjustable from Front 2"  
Segmented Infeed Roller Diameter 3 "
Table Height Adjust Manual 1 Turn = 1/16"  
Table Support 2 column  
Tool Supplied tool kit  
Number of Speeds 2  
Motor Power 7½ HP
Motor Phase 1 Ph
Motor Voltage 230 V
Model Number 201  
Brand Powermatic  
Overall Dimensions 42 x 49 x 59  
Height 59 inch
Width 49 inch
Length 42 inch
Net Weight 1350 pound
  • Model: 1791261
Estimate Shipping
Please Log In, to display your personal shipping costs.
 
Post Code 
 Update
 
Order Total Estimate
Sub-Total: $6,847.99
Total: $6,847.99
Manufacturers
We Accept