Scotchman AL 1-2U Electrical Notcher
Scotchman electric driven tube & pipe notchers can be used everywhere gas, steam, stainless steel, non-ferrous pipes and many other types of pipe and sections need to be welded together at an angle of 90 degrees. Scotchman pipe notchers make notches for joints quickly and accurately and are ideally suited for double corner joints. Scotchman also offers a notcher for cutting out sink outflows in round and rectangular metal pipes.
The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also fitted with an on/off switch with zero-voltage protection and a guard.
- High Productivity
- Low Investment
- Simple, Fast Operation
- Several Diameters can be Machined on one Tool
- Ideal for Double Corner Joints
- 3-Year Warranty
AL1-2U is the powered combination of the manual AL1, AL2 and ALU. The ALU includes a sink outflow notcher for round and square tube sections from 1.0630" to 2.40158"
|Powered Combination of AL1, AL 2 and ALU
|Includes Vent Notch to Quickly Create a Uniform Vent-notch in Round or Square Sections for Galvanizing Outflow from 1.0630" to 2.40158" Outside Diameter
|Motor Driven-Notches 3/4", 1", 1-1/4", 1-1/2" and 2" up to schedule 40 wall thickness
|Motor Forms One Unit with Special Eccentric Shaft that Drives the Notching Tool
|Motor Equipped with On/Off Switch with a Zero Voltage Protection and Guard
|Equipped with Safety Guard to Surround and Protect Notching Dies
|Warranty: Three Years on Parts
|Manufactured in the Netherlands
||3/4", 1", 1-1/4", 1-1/2" and 2" up to schedule 40 wall thickness
||3-1/2 hp 3ph
||30" x 13-1/2" x 11-1/2"
||762 mm x 343 mm x 292 mm
|Vent Notch Maximum Wall Thickness