View All Of Our Products

Jet Tool 10-Inch Table Saw, Steel Wings, Extension Table, 52-Inch Rip, 1Ph 115V - JPS-10 ProShop II

Jet Tool 10-Inch Table Saw, Steel Wings, Extension Table, 52-Inch Rip, 1Ph 115V - JPS-10 ProShop II The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contractor-style machine. The redesigned transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. The exclusive ProShop fence system is available in 30” or 52” rip capacity. Standard Features: Convenient, magnetic paddle switch for the safest operation possible
CSA Certified
Improved dust shroud around blade for greater dust collection
Innovative single belt design for easier belt tensioning and reduced vibration
Low profile riving knife included
Motor reset switch conveniently relocated to the power switch, instead of the motor
Newly designed arbor lock to change blades quickly and easily
On board storage for all included accessories
Quick release riving knife for hassle free riving knife changes
Redesigned guard for better protection and ease of use.
Specifications:
Stock Number    JT9-725005K
Arbor Speed (RPM)    4000
Blade Diameter (In.)    10
Dust Collection Minimum CFM Required (CFM)    350
Dust Port Outside Diameter (In.)    4
Maximum Depth of Cut at 45 Degrees (In.)    2-1/8
Maximum Depth of Cut (In.)    3-1/8
Maximum Diameter of Dado (In.)    8
Maximum Rip Left of Blade (In.)    13-1/2
Maximum Rip Right of Blade (In.)    52
Maximum Width of Dado (In.)    13/16
Miter Gauge Type    T-Slot with Stops
Model Number    JPS-10
Motor Amps    7.4
Motor Power (HP)    1-3/4
Motor Voltage (V.)    115
Prewired Voltage (V.)    115
Prop 65    Cancer and Reproductive Harm
Recommended Circuit Size (Amps.)    10
Style (Type)    Contractor
Table Height from Floor (In.)    34-3/4
Table in Front of Saw Blade at Maximum Depth of Cut (In.)    8.81
Table Size (L x W) (In.)    20 x 27
Table Type    Cast Iron
Warranty    5 Year
Gross Weight    312.35
Net weight    285.85…

Buy Now
Jet Tool 12" Blade Xacta Saw 50" Rip 5HP 1PH - (JTAS-12-DX)

Jet Tool 12" Blade Xacta Saw 50" Rip 5HP 1PH - (JTAS-12-DX) With a riving knife and 80” of solid cast iron work surface, this saw will see you through all your projects. The weight of this machine ensures stability for smooth cutting operation. The JTAS-12-DX also features a maximum rip of 14” left of the blade, giving you more capacity. Dust collection is improved thanks to a collection shroud around the blade and an integrated hose. All of this is backed by JET industry-leading 5-year warranty and knowledgeable customer service professionals. Standard Features: 40-1/2” fence provides greater stability and better support when ripping
80” of solid cast iron provides a massive work surface
Collection shroud around the blade and integrated hose improve dust collection
External tool storage for the fence and miter gauge
Integrated arbor lock is accessed from table top for rapid blade change
Poly V-Belt increases efficiency and reduces slipping and vibration
Removal of blade guard, pawls and riving knife takes only seconds
Riving knife maintains close blade proximity to reduce chance of kickback.
Specifications:
Stock Number    JT9-708546PK
Arbor Diameter (In.)    1
Blade Diameter (In.)    12
Dust Collection Minimum CFM Required (CFM)    350
Dust Port Outside Diameter (In.)    4
Maximum Depth of Cut (In.)    4
Maximum Diameter of Dado (In.)    8
Maximum Rip Left of Blade (In.)    14
Maximum Rip Right of Blade (In.)    50
Maximum Width of Dado (In.)    13/16
Miter Gauge Type    T-Slot with Stops
Model Number    JTAS-12-DX
Motor Amps    20
Motor Power (HP)    5
Motor Voltage (V.)    230
Prewired Voltage (V.)    230
Prop 65    Cancer and Reproductive Harm
Style (Type)    Cabinet
Table Size (L x W) (In.)    31-1/2 x 24
Table Type    Cast Iron
Warranty    5 Year
Gross Weight    669.3
Net weight    623.0…

Buy Now
Jet Tool 14" Bandsaw, 1-3/4HP, 115/230V - JWBS-14SFX

Jet Tool 14" Bandsaw, 1-3/4HP, 115/230V - JWBS-14SFX The newest addition to the JET Bandsaw lineup, the JET 14” SFX Steel Frame Bandsaw redefines the line between functionality and affordability. The large, cast iron table features 360 sq. in. of work surface for greater work piece support when making deep cuts. The machined aluminum fence system features easily visible measurements for the most accurate cutting. This saw is equipped with JET’s easily adjustable blade guide system, makes adjustments quick and simple. The JET 14” Bandsaw also features over 13 inches of resaw capacity, and dual 4 inch dust ports for maximum dust collection efficiency. Heavy duty tubular steel welded construction, robust stamped steel doors with welded steel pin hinges, and heavy duty base, allows for stability and durability when sawing large work pieces. The JET 14” SFX Bandsaw provides the woodworker all the premium features of a higher end saw with superior performance to complete any project. Standard Features: Blade tensioning wheel located on top of the saw for better work piece clearance when cutting
Convenient 115V AC outlet location for optional accessories
Deeper table with a massive 360 sq. in. of cast iron work surface for greater work piece support
Engineered diecast and steel trunnion system, allows for single point adjustments when moving table
Independently adjustable, upper and lower ball bearing blade guides
Oversized lower bearing bolt pattern for maximum strength and rigidity.
Specifications:
Stock Number    JT9-714400K
Model Number    JWBS-14SFX
Warranty    5 Year
Band Saw Size/Wheel Diameter (In.)    14
Blade Length (In.)    116
Minimum Saw Blade Width (In.)    1/8
Blade Speed (SFPM)    3000
Cutting Capacity Height (In.)    13
Dust Port Outside Diameter (In.)    4
Dust Collection Minimum CFM Required (CFM)    350
Table Size (L x W) (In.)    21 x 17
Motor Power (HP)    1.75
Motor Phase    Single
Motor Voltage (V.)    115/230
Prewired Voltage (V.)    115
Recommended Circuit Size (Amps.)    20
Motor Amps    15/7.5
Table Height from Floor (In.)    40
Prop 65    Cancer and Reproductive Harm
Overall Dimensions (L x W x H) (In.)    37 x 27-1/2 x 75-3/8
Net weight    272.0
Gross Weight    316.0…

Buy Now
Jet Tool 15" Benchtop Drill Press 16 Speed - JDP-15B

Jet Tool 15" Benchtop Drill Press 16 Speed - JDP-15B The JET JDP-15B, 15” Benchtop Drill Press. From a full 3-1/8” of spindle travel to the sturdy cast iron head with a poly v-belt drive system, this drill press is designed to perform. It features a long-lasting, built-in LED work light to provide direct lighting while reducing shadows. Another feature includes the one-handed belt-tensioning system and a large 12-1/2" x 17" work table which are all CSA Certified. Features:
Integrated depth stop makes repetitive drilling quick and easy
Large cast iron base provides stability
One-handed belt tensioning allows for rapid speed changes
Power switch features a safety key and large, paddle-style off button
Powered by an efficient 3/4HP, 1Ph, 115V TEFC motor and poly-v belt drive system
Replaceable MDF table insert
Table edge lip designed to make clamping easy
Xacta-X laser system easily identifies the drill center.
Specifications:
Stock Number    JT9-716200
Assembled Machine Dimensions (L x W x H) (In.)    27 x 17 x 43-7/8
Chuck Size (In.)    5/8
Column Diameter (In.)    2-3/4
Model Number    JDP-15B
Motor Power (HP)    3/4
Motor Voltage (V.)    115
Number of Spindle Speeds    16
Prop 65    Cancer and Reproductive Harm
Spindle Distance to Base (In.)    26-3/4
Spindle Distance to Table (Max.) (In.)    18-5/16
Spindle Travel (In.)    3-1/8
Style (Type)    Benchtop
Swing (In.)    15
Table Size (L x W) (In.)    12-1/2 x 17
Warranty    5 Year
Weight (Lbs.)    154
Gross Weight    165.5
Net weight    154.0…

Buy Now
Jet Tool 16" x 40" Wood Lathe - JWL-1640EVS

Jet Tool 16" x 40" Wood Lathe - JWL-1640EVS The new JET® 16” x 40” Electronic Variable Speed Woodworking Lathe is loaded with cutting-edge features that distinguishes it from others in its class. Included is a sliding headstock with a rubber tool mat, electronic infinitely variable speed from 40 – 3200 RPM, and a newly designed headstock locking handle accessible from front of lathe. Other features include a conveniently located digital readout and leg-mounted tool holder. Standard Features: 36 integrated indexing positions
Banjo uses non-marring, positive locking wedge system to securely hold tool post
E-drive Inverter features a built in EMI filter
Extended spindle nose houses dual headstock spindle bearings
Improved tailstock quill locking mechanism incorporates an anti-rotation key
Inverter is enclosed for added protection
Spindle lock latch frees up both hands
Tailstock features Acme threads for smooth and durable movement
Tool post locking mechanism designed for year of consistent strength.
Specifications:
Stock Number    JT9-719500
Bed Construction    Cast Iron
Centerline of Spindle to Floor (In.)    44-1/2
Model Number    JWL-1640EVS
Motor Amps    4.6
Motor Power (HP)    1-1/2
Motor Voltage (V.)    230
Number of Indexing Positions    36
Prop 65    Cancer and Reproductive Harm
Recommended Circuit Size (Amps.)    20
Spindle Bore (In.)    5/8
Swing Over Bed (In.)    16-1/2
Warranty    5 Year
Wiring Remarks    115v input only
Gross Weight    440.0
Net weight    375.0…

Buy Now
Jet Tool 18" Bandsaw 1.75HP 1PH 115V - JWBS-18SFX

Jet Tool 18" Bandsaw 1.75HP 1PH 115V - JWBS-18SFX The JET JWBS-18SFX is a versatile and reliable 18" bandsaw designed to meet the needs of both amateur and professional woodworkers. It features a 1.75HP motor powered by a standard 115V outlet, providing ample power for a wide range of woodworking tasks. This bandsaw shares many of the premium features found in the 3HP model, including the safety foot brake for blade stoppage, ergonomically-designed knobs for smooth adjustments, and a clear view window for precise blade tracking. Its dual 4" dust collection ports ensure efficient removal of sawdust and chips, promoting a cleaner working environment. The bandsaw's table can tilt from 5° left to 45° right, allowing for versatile cutting angles. With a sturdy cast iron trunnion for maximum stability and a heavy-duty fence system, the JET JWBS-18SFX is designed to deliver consistent and accurate cuts, making it an excellent addition to any woodworking shop. Standard Features: Efficient 1.75HP Motor: Provides ample power for a variety of woodworking tasks, ideal for home and professional use.
Safety Foot Brake: Ensures immediate blade stoppage for enhanced safety.
User-Friendly Adjustments: Ergonomically-designed knobs and handwheels for smooth and precise modifications.
Blade Tracking Window: Offers a clear view for accurate blade tracking.
Effective Dust Collection: Dual 4" ports collect dust and chips at the source, keeping your workspace clean.
Quick Blade Tensioning: Heavy-duty system with a visible scale for quick and easy blade tension adjustments.
Superior Blade Support: Rigid, four-sided guide post with rack and pinion adjustment for optimal stability.
Durable Cast Iron Trunnion: Ensures maximum support and stability during cutting operations.
Specifications:
Stock Number    JT1-549
Model Number    JWBS-18SFX
Warranty    5 Year
Blade Wheel Diameter (In.)    18-1/2
Wheel Speed (RPM)    6400
Maximum Saw Blade Width (in)    1-1/4
Minimum Saw Blade Width (In.)    1/8
Cutting Capacity Height (In.)    16
Cutting Capacity Width (In.)    18
Dust Port Outside Diameter (In.)    4
Dust Collection Minimum CFM Required (CFM)    600
Table Size (L x W) (In.)    27-1/4 x 20 x 1-5/8
Table Tilt (Deg.)    Left 5, Right 45
Motor Power (HP)    1.75
Motor Phase    Single
Prewired Voltage (V.)    115
Recommended Circuit Size (Amps.)    20
Motor Amps    12
Table Height from Floor (In.)    37
Prop 65    Cancer and Reproductive Harm
Table T-Slot (In.)    3/4
Net weight    383
Gross Weight    570…

Buy Now
Jet Tool 18" Bandsaw 3HP 1PH 230V, JWBS-18SFX-3

Jet Tool 18" Bandsaw 3HP 1PH 230V, JWBS-18SFX-3 The JET JWBS-18SFX-3 is a powerful 18" bandsaw engineered for superior performance in both professional and hobbyist woodworking settings. Featuring a robust 3HP motor operating on a 230V power supply, this bandsaw delivers exceptional re-saw capacity and greater throat depth, enabling users to tackle larger and more intricate cuts with ease. Key safety features include a foot brake for blade stoppage, while the ergonomic design ensures smooth adjustments and optimal blade support through a rigid, four-sided guide post with rack and pinion adjustment. The dual 4" dust collection ports effectively capture dust and chips, maintaining a clean workspace. Additionally, the table's tilting capability (5° left and 45° right) accommodates a variety of cuts, making it versatile for different projects. Built for durability and stability, the JET JWBS-18SFX-3 bandsaw is an essential tool for achieving precise and high-quality woodworking results. Standard Features: Powerful 3HP Motor: Handles large, tough cuts with ease, perfect for heavy-duty woodworking projects.
Foot Brake Safety: Blade stoppage for enhanced user safety and accident prevention.
Ergonomic Adjustments: User-friendly knobs and handwheels ensure smooth and precise adjustments.
Clear Blade Tracking: Transparent window for easy and accurate blade alignment.
Dual 4" Dust Ports: Efficiently captures dust and chips at the source, maintaining a clean work environment.
Quick Release Tensioning: Heavy-duty system with an easy-to-read scale for fast and efficient blade tension adjustments.
Optimal Blade Support: Rigid, four-sided guide post with rack and pinion adjustment for superior blade stability.
Stable Cast Iron Trunnion: Provides maximum support and stability during operation.
Versatile Cutting Angles: Table tilts 5° left and 45° right to accommodate a wide variety of cuts.
Specifications:
Stock Number    JT1-548
Model Number    JWBS-18SFX-3
Warranty    5 Year
Blade Wheel Diameter (In.)    18-1/2
Wheel Speed (RPM)    6400
Maximum Saw Blade Width (in)    1-1/4
Minimum Saw Blade Width (In.)    1/8
Cutting Capacity Height (In.)    16
Cutting Capacity Width (In.)    18
Dust Port Outside Diameter (In.)    4
Dust Collection Minimum CFM Required (CFM)    600
Table Size (L x W) (In.)    27-1/4 x 20
Table Tilt (Deg.)    Left 5, Right 45
Motor Power (HP)    3
Motor Phase    Single
Motor Voltage (V.)    230
Prewired Voltage (V.)    230
Recommended Circuit Size (Amps.)    20
Motor Amps    15
Table Height from Floor (In.)    37
Prop 65    Cancer and Reproductive Harm
Table T-Slot (In.)    3/4
Net weight    406
Gross Weight    502…

Buy Now
Jet Tool 30" Rip Proshop Tablesaw 1.75 HP 115v - JPS-10

Jet Tool 30" Rip Proshop Tablesaw 1.75 HP 115v - JPS-10 The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contractor-style machine. The redesigned transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. The exclusive ProShop fence system is available in 30” or 52” rip capacity. Standard Features: Convenient, magnetic paddle switch for the safest operation possible
CSA Certified
Improved dust shroud around blade for greater dust collection
Innovative single belt design for easier belt tensioning and reduced vibration
Low profile riving knife included
Motor reset switch conveniently relocated to the power switch, instead of the motor
Newly designed arbor lock to change blades quickly and easily
On board storage for all included accessories
Quick release riving knife for hassle free riving knife changes
Redesigned guard for better protection and ease of use
Specifications:
Stock Number    JT9-725004K
Arbor Speed (RPM)    4000
Blade Diameter (In.)    10
Dust Collection Minimum CFM Required (CFM)    350
Dust Port Outside Diameter (In.)    4
Maximum Depth of Cut at 45 Degrees (In.)    2-1/8
Maximum Depth of Cut (In.)    3-1/8
Maximum Diameter of Dado (In.)    8
Maximum Rip Left of Blade (In.)    13-1/2
Maximum Rip Right of Blade (In.)    30
Maximum Width of Dado (In.)    13/16
Miter Gauge Type    T-Slot with Stops
Model Number    JPS-10
Motor Amps    14.8
Motor Power (HP)    1-3/4
Motor Voltage (V.)    115
Prewired Voltage (V.)    115
Prop 65    Cancer and Reproductive Harm
Recommended Circuit Size (Amps.)    20
Style (Type)    Contractor
Table Height from Floor (In.)    34-3/4
Table in Front of Saw Blade at Maximum Depth of Cut (In.)    8.81
Table Size (L x W) (In.)    20 x 27
Table Type    Cast Iron
Warranty    5 Year
Gross Weight    261.5
Net weight    235.7…

Buy Now
Jet Tool 50" Rip Deluxe Xacta Saw 5HP 230V 1Ph

Jet Tool 50" Rip Deluxe Xacta Saw 5HP 230V 1Ph If you've ever wondered about what a table saw can really do, look no further. Introducing the JET® 10" Deluxe XACTA® saw. The quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The Deluxe XACTA® saw offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. Includes an on-board fence and miter gauge storage. Standard Features: Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
Hinged motor cover on cabinet gives quick access to the motor and belts
Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
Left and right cast iron extension wings
Powder coated paint for a long-lasting, chip-resistant finish
Precision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioning
Rail-mounted magnetic switch is easy to reach and provides overload protection
Wide stance heavy-duty trunnion for stability and smooth blade positioning.
Specifications:
Stock Number    JT9-708677PK
Blade Diameter (In.)    10
Dust Collection Minimum CFM Required (CFM)    350
Dust Port Outside Diameter (In.)    4
Maximum Depth of Cut at 45 Degrees (In.)    2-1/8
Maximum Diameter of Dado (In.)    8
Maximum Rip Right of Blade (In.)    50
Maximum Width of Dado (In.)    13/16
Miter Gauge Type    Deluxe
Model Number    JTAS-10XL50-5/1DX
Motor Amps    18
Motor Power (HP)    5
Motor Voltage (V.)    230
Prewired Voltage (V.)    230
Prop 65    Cancer and Reproductive Harm
Style (Type)    Cabinet
Table in Front of Saw Blade at Maximum Depth of Cut (In.)    10
Table Size (L x W) (In.)    29 x 20
Table Type    Cast Iron
Warranty    5 Year
Gross Weight    510.0
Net weight    510.0  …

Buy Now
Jet Tool 52" Rip Proshop Tablesaw with Cast Iron Table 1.75 HP 115V (JPS-10)

Jet Tool 52" Rip Proshop Tablesaw with Cast Iron Table 1.75 HP 115V (JPS-10) The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contractor-style machine. The redesigned transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. The exclusive ProShop fence system is available in 30” or 52” rip capacity. Standard Features: Convenient, magnetic paddle switch for the safest operation possible
CSA Certified
Improved dust shroud around blade for greater dust collection
Innovative single belt design for easier belt tensioning and reduced vibration
Low profile riving knife included
Motor reset switch conveniently relocated to the power switch, instead of the motor
Newly designed arbor lock to change blades quickly and easily
On board storage for all included accessories
Quick release riving knife for hassle free riving knife changes
Redesigned guard for better protection and ease of use.
Specifications:
Stock Number    JT9-725001K
Arbor Speed (RPM)    4000
Blade Diameter (In.)    10
Dust Collection Minimum CFM Required (CFM)    350
Dust Port Outside Diameter (In.)    4
Maximum Depth of Cut at 45 Degrees (In.)    2-1/8
Maximum Depth of Cut (In.)    3-1/8
Maximum Diameter of Dado (In.)    8
Maximum Rip Left of Blade (In.)    13-1/2
Maximum Rip Right of Blade (In.)    52
Maximum Width of Dado (In.)    13/16
Miter Gauge Type    T-Slot with Stops
Model Number    JPS-10
Motor Amps    7.4
Motor Power (HP)    1-3/4
Motor Voltage (V.)    115
Prewired Voltage (V.)    115
Prop 65    Cancer and Reproductive Harm
Recommended Circuit Size (Amps.)    10
Style (Type)    Contractor
Table Height from Floor (In.)    34-3/4
Table in Front of Saw Blade at Maximum Depth of Cut (In.)    8.81
Table Size (L x W) (In.)    20 x 27
Table Type    Cast Iron
Warranty    5 Year
Gross Weight    352.45
Net weight    325.95  …

Buy Now
Jet Tool JET Black 14" Bandsaw 1.75HP, Single Phase, 115/230V, JWBS-14SFX-BLK

JET Black 14" Bandsaw 1.75HP, Single Phase, 115/230V, JWBS-14SFX-BLK Discover Superior Performance with the JET Black 14” Bandsaw The JET Black 14” Bandsaw redefines functionality and affordability. Featuring a large, performance-coated cast iron table with 360 sq. in. of work surface, it offers exceptional support for deep cuts. The JET Black coating enhances visibility, reduces friction, and eliminates the need for waxing or polishing, ensuring smooth workpiece movement. Equipped with a machined aluminum fence system and easy-to-read measurements, this bandsaw guarantees precise cuts. The adjustable blade guide system simplifies adjustments, making your work faster and more efficient. With over 13 inches of resaw capacity and dual 4-inch dust ports for maximum dust collection, this bandsaw is engineered for top-tier performance. Its heavy-duty tubular steel welded construction, robust stamped steel doors with welded pin hinges, and sturdy base ensure stability and durability for large workpieces. The JET BLACK 14” Bandsaw offers all the premium features of a high-end saw, delivering superior performance for every woodworking project. Standard Features: JET Black Performance Coating: Coated cast iron surface resists corrosion, reduces friction for smoother cuts, and eliminates the need for waxing or polishing.
Top-Mounted Blade Tensioning Wheel: Improves workpiece clearance during cutting for smoother operations.
Convenient 115V AC Outlet: Perfectly positioned for easy access to optional accessories.
360 sq. in. Work Surface: JET Black coated cast iron table offers superior support for large workpieces.
Diecast and Steel Trunnion System: Single-point adjustments for effortless table movements.
Adjustable Blade Guides: Independently adjustable upper and lower ball bearing guides for precision.
Robust Bearing Bolt Pattern: Oversized lower bearing bolt pattern ensures maximum strength and rigidity.
Machined Aluminum Fence System: Features easily visible measurements for the most accurate cuts.
Backed by 5 Years of Reliable Support: Enjoy peace of mind with JET’s 5-year warranty, ensuring long-lasting performance and support for your bandsaw.
Specifications:
Stock Number    JT1-1371
Model Number    JWBS-14SFX-BLK
Warranty    5 Year
Blade Wheel Diameter (In.)    14
Blade Length (In.)    116
Maximum Saw Blade Width (in)    3/4
Minimum Saw Blade Width (In.)    1/8
Blade Speed (SFPM)    3000
Cutting Capacity Height (In.)    13
Dust Port Outside Diameter (In.)    4
Dust Collection Minimum CFM Required (CFM)    400
Table Size (L x W) (In.)    21 x 17
Motor Power (HP)    1.75
Motor Phase    Single
Motor Voltage (V.)    115/230
Prewired Voltage (V.)    115
Motor Amps    15/7.5
Table Tilt to Right (Deg.)    45
Table Height from Floor (In.)    40
Prop 65    Cancer and Reproductive Harm
Throat Capacity (In.)    13-1/2
Net weight    272
Gross Weight    316
Assembled Machine Dimensions (L x W x H) (In.)    37 x 27-1/2 x 75-3/8…

Buy Now
Jet Tools 10'' x 15'' Variable Speed Wood Lathe JWL-1015VS

JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe The new JET 1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here. Standard Features: Improved tensioning system with easier access to belts
Integrated 24 position indexing
Live center in the tailstock
Three speed ranges: 200-1050, 300-1750 and 600-3600
Wider bed ways provide increased rigidity.
Specifications:
Stock Number    JT9-719110
Bed Construction    Cast Iron
Model Number    JWL-1015VS
Motor Amps    4
Motor Power (HP)    1/2
Motor Voltage (V.)    115
Number of Indexing Positions    24
Prewired Voltage (V.)    115
Prop 65    Cancer and Reproductive Harm
Quill Travel (In.)    2
Recommended Circuit Size (Amps.)    10
Spindle Bore (In.)    3/8
Swing Over Bed (In.)    10
Warranty    5 Year
Gross Weight    78.0
Net weight    72.6…

Buy Now
Jet Tools 10" Open Stand Bandsaw - JWB-10

Jet Tools 10" Open Stand Bandsaw - JWB-10 (Stock Number JT9-714000) If space is at a premium in your shop, this is the bandsaw for you. The compact benchtop design allows for easy transport to different shop locations, while the Poly-V drive system provides maximum power transfer from motor to blade and reduces vibration. With quick release blade tension, upper and lower ball bearing blade guides, an extra-large cast iron tilting table, and an easily adjustable LED work light, this well-equipped bandsaw has all the features you're used to on bigger bandsaws.   Features: Aluminum extruded fence ensures smooth sliding action Blade site window to view blade tracking Dust port accepts multiple size hoses Extra large cast iron table with retractable extension wing provides additional work piece support Magnifying cursor enlarges measurement scale for precise fence location One piece welded frame design reduces machine vibration and flex Oversized, ergonomic knobs provide ease of use and maximum control Rack and pinion blade guide adjustment with integrated locking knob for precise height control Rigid steel stand allows bandsaw to transition from the benchtop to the floor Table tilting trunnion allows working angles from 0° to 45°   Specifications: Stock Number JT9-714000 Model Number JWB-10 Warranty 5 Year Band Saw Size/Wheel Diameter (In.) 10 Minimum Saw Blade Width (In.) 1/8 Cutting Capacity Height (In.) 4 Table Size (L x W) (In.) 13-1/8 x 13-3/8 Motor Power (HP) 1/2 Motor Voltage (V.) 115 Motor Amps 3.4 Table Height from Floor (In.) 41-1/2 Prop 65 Cancer and Reproductive Harm Net weight 83.0 Gross Weight 92.0 …

Buy Now
Jet Tools 12-Inch Benchtop Variable-Speed Drill Press (JWDP-12)

  Jet Tools 12-Inch Benchtop Variable-Speed Drill Press (JWDP-12) When is a Drill Press powerful enough to tackle the big jobs, and portable enough to do it anywhere? When it's the all-new JET 12 Variable Speed Drill Press. A powerful 1/2 HP induction motor that pushes through almost anything you throw at it; over 3-1/8" spindle travel for maximum depth cutting, and our innovative X-shaped XACTA Laser that ensures drilling accuracy; makes this workhorse the best choice for in your shop or on the go. Features:
10" x 16-1/8" Cast iron base fits neatly on work benches with limited space
Clear linear scale with depth stop for consistent drilling depths
Digital read out displays spindle speed for different drilling applications
Large paddle switch provides easy shut off and lockout protection
LED work light increases visibility for intricate applications
Mechanical variable speed drive system for easy speed changes
Oversized, ergonomic knobs provide ease of use and maximum control
Retractable roller extension provides support and quick work piece adjustment
Stable base design allows for easy re-positioning on work bench
Variable speed drive system.
Specifications:
More Information
Stock Number    JT9-716000
Chuck Size (In.)    5/8
Column Diameter (In.)    2-1/2
Model Number    JWDP-12
Motor Amps    5
Motor Power (HP)    1/2
Prop 65    Cancer and Reproductive Harm
Spindle Distance to Base (In.)    23-3/8
Spindle Distance to Table (Max.) (In.)    17
Spindle Travel (In.)    3-1/8
Swing (In.)    12
Warranty    5 Year
Weight (Lbs.)    85
Gross Weight    92.5
Net weight    85.0…

Buy Now
Jet Tools 12'' x 21'' Variable Speed Wood Lathe JWL-1221VS

Jet Tools 12'' x 21'' Variable Speed Wood Lathe JWL-1221VS The JET 1221VS is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept… Control. Standard Features: Controls and large DRO with recessed Power Switch
Acme thread in Tailstock
24 integrated indexing positions
Forward to reverse is a smooth transition
Innovative ratchet style belt tension system (patent pending)
Integrated, spring loaded spindle lock
Optimally designed speed ranges
Patent Pending
Unrivaled speed control
Specifications:
Stock Number    JT9-719200
Gross Weight (Lbs)    136.69
Model Number    JWL-1221VS
Motor Amps    6
Motor (HP)    1
Motor Phase    1
Motor Power (HP)    1
Motor Voltage (V.)    115
Number of Indexing Positions    24
Overall Dimensions (L x W x H) (In.)    39.3" x 17.7" x 17.7"
Prewired Voltage (V.)    115
Prop 65    Cancer and Reproductive Harm
Recommended Circuit Size (Amps.)    10
Shipping Dimensions (L x W x H) (In.)    35.82" x 14.56" x 21.25"
Spindle Bore (In.)    3/8
Swing Over Bed (In.)    12-1/2
Warranty    5 Year
Weight (Lbs.)    121.25
Gross Weight    136.69
Net weight    121.25…

Buy Now
Jet Tools 14" Closed Stand Bandsaw, 1HP, 1Ph, 115/230V

Jet Tools 14" Closed Stand Bandsaw, 1HP, 1Ph, 115/230V The JET® 14'' Closed Stand Bandsaw is a simple but strong bandsaw that is perfect for the home woodworking shop. The 15" x 15" offset cast iron table gives you more work area in front of the blade. Graphite impregnated polymer blade guides with roller bearing thrust guides provide quicker set-up and a cooler running blade. This bandsaw features very little setup when you first get it home but will promise years of solid heavy duty use. You won't regret buying this one! Standard Features: 3/8", 6 TPI woodworking blade is included so you can start cutting right away
6-spoke, precision computer balanced wheels eliminate vibration for accurate blade tracking
6" depth resaw capacity for cutting larger pieces of wood
Micro-adjustable lower blade guide reduces set up time and makes adjustments easier
Single knob tracking adjustment simplifies the blade tracking process.
Specifications:
Stock Number    JT9-708115K
Model Number    JWBS-14CS
Warranty    5 Year
Band Saw Size/Wheel Diameter (In.)    14
Blade Length (In.)    93-1/2
Minimum Saw Blade Width (In.)    1/8
Blade Speed (SFPM)    3000
Cutting Capacity Height (In.)    6
Dust Port Outside Diameter (In.)    4
Dust Collection Minimum CFM Required (CFM)    300
Table Size (L x W) (In.)    15 x 15
Motor Power (HP)    1
Motor Phase    1
Table Height from Floor (In.)    43-1/2
Prop 65    Cancer and Reproductive Harm
Net weight    185.0
Gross Weight    200.0…

Buy Now
Jet Tools 14" x 40" Benchtop Wood Lathe - JWL-1440VS

Jet Tools 14" x 40" Benchtop Wood Lathe - JWL-1440VS Do you want a lathe that’s as versatile as your turning? The 1440 lathe from JET can be tailored to accomplish a wide range of projects. With a sliding and pivoting headstock, variable speed, and many other great features this lathe meets the needs of woodturners. Experience the 1440 lathe and see how Versatility Takes Shape. Standard Features: Acme thread in Tailstock (bullet)
CSA Certified
Easy-to-read RPM display
Improved tailstock quill locking with anti-rotation key
Optional extension bed takes the capacity to 60" between centers
Positive locking tool rest with redesigned clamping
Sliding headstock pivots 360 degrees with 7 positive locking positions at 0, 30, 60, 90, 120, 180, and 270 degrees for maximum variability and optimal user comfort
Variable speed from 400-3000 RPM.
Specifications:
Stock Number    JT9-719400
Bed Construction    Cast Iron
Centerline of Spindle to Floor (In.)    44
Model Number    JWL-1440VS (mn)
Motor Amps    11/5.5
Motor Power (HP)    1
Number of Indexing Positions    36
Prewired Voltage (V.)    115
Prop 65    Cancer and Reproductive Harm
Spindle Bore (In.)    3/8
Style (Type)    Benchtop
Swing Over Bed (In.)    14-1/2
Swing Over Tool Rest Base (In.)    11
Warranty    5 Year
Gross Weight    270.0
Net weight    220.0…

Buy Now
Jet Tools 14" x 40" Wood Lathe with Legs - JWL-1440VSK

Jet Tools 14" x 40" Wood Lathe with Legs - JWL-1440VSK Do you want a lathe that’s as versatile as your turning? The 1440 lathe from JET can be tailored to accomplish a wide range of projects. With a sliding and pivoting headstock, variable speed, and many other great features this lathe meets the needs of woodturners. Experience the 1440 lathe and see how Versatility Takes Shape. Standard Features: Acme thread in Tailstock
CSA Certified
Easy-to-read RPM display
Headstock slides for maximum versatility
Improved tailstock quill locking with anti-rotation key
Optional extension bed mounts in 3 separate positions for larger outboard turning or 60" between centers
Positive locking tool rest with redesigned clamping
Variable speed from 400-3000 RPM.
Specifications:
Stock Number    JT9-719400K
Bed Construction    Cast Iron
Centerline of Spindle to Floor (In.)    44
Model Number    JWL-1440VSK
Motor Amps    11/5.5
Motor Power (HP)    1
Number of Indexing Positions    36
Prewired Voltage (V.)    115
Prop 65    Cancer and Reproductive Harm
Spindle Bore (In.)    3/8
Style (Type)    Floor standing Model
Swing Over Bed (In.)    14-1/2
Swing Over Tool Rest Base (In.)    11
Warranty    5 Year
Gross Weight    413.0
Net weight    352.0…

Buy Now
Jet Tools 15" Bandsaw 1-3/4HP Motor - JWBS-15

Jet Tools 15" Bandsaw 1-3/4HP Motor - JWBS-15   Designed to perform, the JET 15” bandsaw delivers more re-saw capacity, greater throat depth and the horsepower you need to tackle bigger boards, create smoother edges and master the intricate cuts. The heavy-duty cast-iron fence system is built to give you the sturdiness and support you need for every project and features a micro-adjust dial for exact placement. The table is slotted to allow for front blade removal and the guide post has a stress-free magnetic door on the front for efficient blade changes. Large, independently adjustable guides are tool-less to save you time on set up. The JET 15” steel frame bandsaw is engineered to build great projects through superior performance. Features: Blade tracking window provides clear view of blade during tracking Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy Cast iron trunnion for maximum support and stability Conveniently located dual 4" dust collection ports catch dust and chips at the source Easy-to-read blade tension scale can be viewed through upper door window Heavy duty tensioning with quick release and three settings: full tension, partial tension, and full release Rigid, four-sided guide post with rack and pinion adjustment for optimum blade support Round table insert features leveling screws for precise adjustment Single knob adjustment simplifies the blade tracking process Table tilts 5° left and 45° right to accommodate a wide variety of cuts Specifications:   Stock Number JT9-714600 Model Number JWBS-15 Warranty 5 Year Band Saw Size/Wheel Diameter (In.) 14-3/4 Minimum Saw Blade Width (In.) 1/8 Blade Speed (SFPM) 3100 Cutting Capacity Height (In.) 14 Dust Collection Minimum CFM Required (CFM) 400 Table Size (L x W) (In.) 21-1/2 x 16 x 2 Motor Power (HP) 1-3/4 Prewired Voltage (V.) 115 Recommended Circuit Size (Amps.) 20 Motor Amps 15/7.5 Table Height from Floor (In.) 35 Prop 65 Cancer and Reproductive Harm Net weight 382.0 Gross Weight 446.0    …

Buy Now
Jet Tools 15" Floorstanding Drill Press - JDP-15F

Jet Tools 15" Floorstanding Drill Press - JDP-15F The JET JDP-15F, 15” Floor Standing Drill Press. From a full 3-1/8” of spindle travel to the sturdy cast iron head with a poly v-belt drive system, this drill press is designed to perform. This drill press
features a long-lasting, built-in LED work light to provide direct
lighting while reducing shadows. Another feature includes the one-handed belt-tensioning system and a large 12-1/2" x 17" work table which are all CSA Certified. Features:
Integrated depth stop makes repetitive drilling quick and easy
Large cast iron base provides stability
One-handed belt tensioning allows for rapid speed changes
Power switch features a safety key and large, paddle-style off button
Powered by an efficient 3/4HP, 1Ph, 115V TEFC motor and poly-v belt drive system
Replaceable MDF table insert
Table edge lip designed to make clamping easy
Xacta-X laser system easily identifies the drill center.
Specifications:
Stock Number    JT9-716250
Assembled Machine Dimensions (L x W x H) (In.)    27 x 17 x 63-1/4
Chuck Size (In.)    5/8
Column Diameter (In.)    2-3/4
Model Number    JDP-15F
Motor Power (HP)    3/4
Motor Voltage (V.)    115
Number of Spindle Speeds    16
Prewired Voltage (V.)    115
Prop 65    Cancer and Reproductive Harm
Spindle Distance to Base (In.)    46-1/2
Spindle Distance to Table (Max.) (In.)    30-1/2
Spindle Travel (In.)    3-1/8
Style (Type)    Floor standing Model
Swing (In.)    15
Table Size (L x W) (In.)    12-1/2 x 17
Warranty    5 Year
Weight (Lbs.)    172
Gross Weight    183.0
Net weight    172.0…

Buy Now
Result Pages:
Continue
Manufacturers
Categories
Quick Search
What's New?
Shop Fox W1772 10HP 37" Dual Drum Sander
Shop Fox W1772 10HP 37" Dual Drum Sander
$69,598.00
Bestsellers
  1. Onsrud 3/8" Solid Carbide Three Flute Compression w/Marathon Coating
  2. Onsrud Solid Carbide Router Bit 60-123MW, 2 Flute, Compression (3/8" DIA x 7/8" CEL)
  3. Onsrud Double Flute - Solid Carbide Downcut Spiral Wood Rout (1/4 Cut DIA, 7/8 Flute LGTH)
  4. Onsrud Double Flute - PCD Tipped Tooling - PCD Full Face (1/4 Cut DIA, 3/4 Flute LGTH)
  5. Single Flute - Solid Carbide Upcut Spiral O Flute (1/4 Cut DIA, 1-1/4 Flute LGTH, 1/4 SHK DIA)
  6. Onsrud Double Flute - Solid Carbide Max Life Compression Spiral (3/8 Cut DIA, 1-1/8 Flute LGTH)
  7. Onsrud Double Flute - Solid Carbide Chipbreaker Finisher UPCUT (1/2 Cut DIA, 1-5/8 Flute LGTH)
  8. Onsrud Double Flute - High Speed Steel O Flute Straight
  9. Single Flute - Solid Carbide Upcut Spiral O Flute HP METRIC (4mm Cut DIA, 20mm Flute LGTH, 6mm SHK DIA)
  10. Onsrud Double Flute - Solid Carbide Chipbreaker Spiral (1/2 Cut DIA, 1-5/8 Flute LGTH)